This website is using cookies. By using this website you agree to the use of cookies. For further information visit the page Privacy.

"CitriSurf® is a perfect and environmentally friendly alternative to passivating with nitric acid!"

Dieter Fuchs, Boehringer Ingelheim Pharma GmbH & Co. KG

Rust+Rescue™ 200

Rust+Rescue™200 is a high quality blend of chemicals formulated for the protection of stainless steel and other metal surfaces from moisture and harsh atmospheric chemicals that could lead to corrosion.

Physical Properties
Chemical Composition Calcium sulfonate, proprietary ingredients
Operating Temperature 21–32°C
Flash Point 66°C
Normal working concentration Use as received
Packaging 1 gallon or 55 gallon metal containers

Application Procedure

  1. To assure best results, the parts to be treated should be thoroughly cleaned to remove dirt, oils, and grease with an appropriate cleaning solution prior to treatment with Rust+Rescue™200. If thorough cleaning is not possible during use in the field, wipe the surface free of dirt and oils prior to application. All equipment, mixers, applicators or pumps should be clean and dry prior to use.
  2. Prior to use, mix thoroughly by shaking or stirring. Apply a light coat of Rust+Rescue™200 to the surface to be protected with a clean soft cloth, sprayer, brush or roller. Coverage is approximately 300 square feet per gallon. Wait approximately 10 minutes and then wipe off the excess product. Allow the surface to dry completely in air. Drying can be accelerated by use of a hot air oven or other drying medium such as an air blower (hair dryer).
  3. If rust is on the surface, remove all rust first with a rust remover such as CitriSurf®77plus or CitriSurf®2310, using the procedure recommended for that product. Then allow surface to dry completely before applying Rust+Rescue™200.

Notes on Use

Although very safe in normal use, Rust+Rescue™200 is a Calcium sulfonate based material, and as such it may cause
irritation to exposed surfaces of the body for some persons. See Material Safety Data Sheet before using this material. Rubber or plastic gloves should be worn to apply the product to the surface or to wipe it dry.

Disposal

Dispose of according to all federal, state and local regulations.

Storage

Rust+Rescue™200 should be stored at temperatures between 10 °C and 49 °C in steel or approved plastic containers (polyethylene or polypropylene).

Technical Services

For technical assistance, please contact MKK GmbH.

Testing of your products with Rust+Rescue™200 before using in production is recommended. Every product and production facility is different, and requires testing to ensure that Rust+Rescue™200 is compatible with the particular situation. No warranty is implied, or may be given in writing or verbally without the written permission of Stellar Solutions, Inc.