CitriSurf®
Passivating stainless steel with citric acid
CitriSurf® is a citric-acid-based cleaning and passivating solution for industrial applications. It safely and environmentally responsibly removes free iron from the surface of stainless steels and creates important conditions for corrosion-resistant, reproducible stainless steel surfaces.
The short path to the right solution
Physical property
| Physical property | |
| Specific gravity | 1 |
| Viscosity | Thixotropic |
| State | Viscous liquid* |
| Chemical composition | Citric acid, water and cleaning and rust-removal additives |
| Working temperature | Room temperature up to max. 75° C |
| Flash point | Non-flammable |
| Water solubility | 99% |
| Normal working concentration | Undiluted |
| Normal pH value | ~2.0 |
| Packaging units | 5- and 20-litre plastic canisters |
* A liquid version of this product is available as CitriSurf®77plus
The cleaning components of CitriSurf®2310 intensively remove all oil and grease residues from the surface. Existing rust is dissolved and can be removed mechanically. The special citric acid then removes the free iron ions from the upper molecular layers. This produces a positive change in the chromium-to-iron ratio, resulting in improved rust resistance or passivation of the surface. No impairment of the function of the passivated part is to be expected. Weld seams and solder joints are also not attacked, but are freed from contamination with free iron. Other materials, such as aluminium, can also be treated with CitriSurf® to remove iron components and iron-containing contamination introduced into the surface during machining. The stated exposure times refer to use on stainless steels. For other materials, special parameters must be developed through testing and/or in consultation with the developer or manufacturer of CitriSurf®.
Although the use of CitriSurf® is generally very safe, citric acid can cause skin irritation. Please refer to the safety data sheet for further information.
CitriSurf® is not classified as dangerous goods and can be disposed of without difficulty in its delivered condition. However, during use, components may enter the solution that require special disposal. The relevant laws and statutory regulations for the disposal of liquids and chemicals must be observed. Please consult the responsible local authorities.
CitriSurf®2310 should be stored between 10° C and 40° C in containers made of PP, PE or acid-resistant stainless steel.
CitriSurf®2310, Gel
Stainless steel - derusting and passivating surfaces with gel: CitriSurf®2310 is a high-quality product for cost-effective and efficient cleaning, rust removal and passivation of stainless steels. It removes free iron from the surface of stainless steels and dissolves existing rust. Its viscosity enables simple and safe application on surfaces, weld seams and large-area objects that cannot be passivated in an immersion bath. This process complies with the procedures for stainless-steel passivation described and required in the ASTM A-967 & AMS2700 standards.
APPLICATION
- To achieve the best results, the parts to be passivated must be thoroughly cleaned with an alkaline cleaner before treatment with CitriSurf®2310 to remove oil, dirt and lubricant residues. If this is not possible, mechanical cleaning should be carried out.
- All equipment such as containers, mixers, nebulizers, spray devices and hoses should be clean and dry before use. Only containers made of PP, PE or acid-resistant stainless steel should be used for storing and transporting CitriSurf®.
- WARNING!!! Appropriate protective clothing, including safety goggles, should always be worn when using CitriSurf®2310. Further details can be found in the safety data sheet. Although CitriSurf® is much safer and less aggressive than other products, its components can cause slight skin irritation and may damage the eyes in case of direct contact.
- Do not apply CitriSurf®2310 to wires or cables that are still live. CitriSurf®2310 contains water and is conductive, and electric current can cause fatal injuries.
- Mix the solution well before use. Apply the solution generously and evenly to the surface. The exposure time is 10 to 30 minutes; during this time the gel must not dry out. Then rinse the solution thoroughly from the surface. Repeat the process several times if necessary. Disposal must be carried out in accordance with local disposal regulations.
- After the final rinsing step, the workpiece should be allowed to dry sufficiently to complete the passivation process. Drying can be accelerated with a hot-air blower. Before further use or packaging, the workpiece must be completely dry.
- We recommend a professional pressure sprayer to apply the gel evenly.
Consulting & Contact
For many years, we have supported companies with stainless steel passivation, from root cause analysis through to implementation, including on site by arrangement.
How can CitriSurf® be ordered?
Exclusively from MKK GmbH, Oldenburg
Order by email: order@citrisurf.de
Please note:
- Provide your VAT ID
- Billing address and delivery address required
- Orders before 12:00 noon: usually shipped on the next working day
- Delivery date = shipping date (transit times depend on the logistics provider)